Obitalk 110 reporting offline and web brower not responding

[FrankD]

I recently got an obitalk 110 and started to use it within the last week.  First thing I did was upgrade the firmware to 2651.  It is configured with GV as SP1.  No LINE connected to the unit.

The unit works fine for some period of time.  Later I have noticed that the unit goes "offline" as reported by obitalk.com and the web interface does not respond after some period of time.  It also is not responding to pings.  To clear the problem, I would remove power and reboot it.

Right now its in that "hung" state.  I am not currently in front of the device, but it is functioning at some level - syslog messages are still be sent out.

Has anybody seen this before?

Frank

[Eleventh]

Yes it also happens to my obi110 ever since I upgraded to the latest version. Need to manually reboot the device for it to work again.

[FrankD]

I did a 'reset configuration'/reprogrammed the obi.  After 12 hours of running, it looks stable.  You might want to give that a try.